Thursday, March 31, 2016

Kodak Commercial Film 8x10 in. Negative Print Film

      Kodak     Commercial    

            PROFESSIONAL

                                                            F I L M
This is a very old box of film, dated July 1968.  From reading the specification, this was obviously another great product from Kodak.
The box is unopened and should contain 25 sheets of unexposed film.  Having a low ISO, the fogging may be minimal.  I purchased this film only to practice loading 8x10 film holders in my tent.

Film of this vintage is intended for the experimenters and collectors.

Be sure to check out the closest specification sheet that I could find.

Your box of Kodak Commercial 8x10 Film will be shipped worldwide by way of USPS Priority Mail for domestic buyers and USPS First Class Mail for buyers abroad.  PayPal payment is expected to be rendered within 12 hours of the listing's end.

Thanks for looking!

Other Photography Related Goodies

Kodak Ektachrome 64T 8x10 Transparency Film

Kodak Professional
Ektachrome 64T 8x10 Color Transpareny Film 

ISO 64, 50 Sheets, 8x10 Format - Dated 4/1996

This listing is for 1 Box of 10 8x10 Sheets of the film as described above.

I was saving this for a Reversal/Transparency Pinhole Project.  My loss is your gain.

I have had the film since Christmas 2011, stored cool and dry within a cherry wood humidor.

According to the professional photographer from whom I purchased the film, the film had been frozen.

Another lost classic...

Here is the specification sheet from Kodak!

Daily shipping via USPS Priority Mail, Domestic and USPS First Class International.

Please check out my other auctions!

Thanks for looking!



Thursday, March 24, 2016

NSE Linhof Technika IV Copal #0 Lens Board with Centered Hole




Here is a very nice NSE branded Tech IV #0 lens board, having the, nearly, rare centered hole.  If you shoot with multiple large format cameras, then you probably already know the value in using Tech IV style lens boards. 

For those of you that may be unfamiliar with these boards, the concept is as follows...
Instead of re-mounting your lenses on the proprietary lens board for the camera that you want to shoot with, mount your lens to a Linhof Technika IV style board and use it with an adapter made for your camera.  This way, you can move the lens from camera to camera without needing to remount the lens.  Also, the Linhof Technika boards are compact, being only 96 mm x 99 mm.


This particular board is almost rare, having a centered hole, as the Linhof specification includes an offset hole.

Should you have any questions on compatibility, then please feel free to inquire via messaging.

Your lens board will ship worldwide by way of USPS First Class Mail after your PayPal payment is received.  Payment is expected within 12 hours of the listing's end.  Should you be unable to render payment within the stated time, then please, send me a message.

Thank you for looking.

Please see my other Photographic Listings

MC Horseman/SINAR Copal #1 Flat Lens Board ~ great candidate for an adapter

Custom SINAR/Horseman Lens board Copal #1 41.6 mm Hole

I will admit that I plan on keeping this lens board as it is a great candidate to become an adapter, due to the thickness.  However, if anyone needs this custom made #1 lens board more than myself, then here it is.

This board is unique as it was milled from a solid.  The thickness is approximately 4.6mm.  Looking at the rear, the recess is 2.1mm deep and ~ 51mm in diameter.  The finish appears vertically brushed.


Lens Board Width: ~140 mm
Lens Board Height: ~ 140 mm
Hole Diameter: 41.6 mm
Weight: 203g (7.2 oz)


Your lens board will ship worldwide by way of USPS First Class Mail within 1 business day after your PayPal payment is received.  Payment is expected within 12 hours of the auction's end.

Thank you for looking!

more photo gear, here!

Tuesday, March 22, 2016

Horseman #0 View Camera Lens Board




This lens board works perfectly on my Horseman and SINAR large format view camera gear.   This is the Copal #0 hole size, or just under 35mm.  Please see the images.


Lens Board Width: ~140 mm
Lens Board Height: ~ 140 mm
Hole Diameter: 34.5 mm
Weight: 147 g (5.2 oz)


Your lens board will ship worldwide by way of USPS First Class Mail within 1 business day after your PayPal payment is received.  Payment is expected within 12 hours of the auction's end.

Thank you for looking!

more photo gear, here!

Monday, March 21, 2016

Arca-Swiss #1 Lens board 13mm Recessed - Clean

This is the modern recessed lens board for the Arca-Swiss Systems, both F-Line and M-Line.  To my understanding, this lens board was considered the default lens board and there may have not been a flat lens board at all.

Lens Board Width: 171 mm
Lens Board Height:  171 mm
Hole Diameter: 41.7 mm
Weight: 232 grams (8.2 oz)


Your lens board will ship worldwide by way of USPS First Class Mail.  Payment is expected to be rendered within 12 hours of the listing's end.  If you can't make the payment within this time frame, then please, send me a message.

Thank you for looking!

more photo gear, here!


Arca-Swiss 13mm Recessed #1 Lens Board

Friday, March 11, 2016

Arca-Swiss 4x5 Long Bellows for F-Line M-Line Large Format View Cameras ~ RARE

Don't let the condition of the box fool you.  This bellows is probably in the best condition we will ever see.  I believe that the bellows is new and unused, though I have listed it as "Used."

On two of the frame corners, I can see a very minimal amount of paint loss and looking closely at the center pleat, the seam or connection point is visible.

Looking into bright Southern California sunlight, I can detect any pinholes or light leakage.

Needless to say, Arca-Swiss bellows are quite rare, especially in this condition and the fact that this is the "Long" bellows that reaches out to 700mm and has a minimum length of about 60mm when compacted.

I had purchase the bellows a Toyo conversion project, but the rarity is far too great and the bellows is more suitable for the owner of an Arca-Swiss Large Format view camera.

For certain, I know that this is the bellows for the Arca-Swiss F-Line and M-Line. As to the earlier Models A,B and C, I believe that they had their own bellows with completely flat frames or a single light trap ridge.  Please do your research.

Your Arca-Swiss Long Bellows will ship worldwide, by USPS Priority Mail.  Payment is expected to be rendered within 12 hours of the listings end.

Thank you for looking!

more photo gear, here!



Arca-Swiss 4x5 Long Bellows 700mm

Wednesday, March 9, 2016

Cambo 4x5 Recessed Copal #0 Lens Board

If you want to shoot with wide angle lenses or if you would just like to regain movements for your Cambo SC II, SC III, SC IV, 4x5 to 8x10 View Camera, then this is the lens board that you need. This #0 lens board has about a 30mm recess so that your lens and shutter assembly will be closer to the plane of focus by 30mm. This lens board will also work with the Calumet series of view cameras that was manufactured by Cambo.

This lens board is in perfect working condition showing only minor wear from normal usage.

Lens Board Width: 163 mm
Lens Board Height:  163 mm
Hole Diameter: 34.6 mm
Recess: 30 mm
Weight: 314 g (11.1 oz)


Your Cambo Lens Board will ship by way of USPS International First Class Mail for buyers abroad, or USPS Priority Mail for domestic buyers, within 1 business day after your PayPal payment is received.  Payment is expected within 12 hours of the auction's end.  If you can't make the payment within this time frame, then send me a message.

Thank you for looking!

more photo gear, here!


Cambo Recessed Lens Board #0
Cambo Recessed Lens Board #0













Click here for availability

Cambo Copal #3 Lens Board for 4x5 Cambo Large Format Cameras

For your Cambo SC II, SC III, SC IV, 4x5 to 8x10 View Camera, is a flat, #3  lens board in excellent condition.  There are other Cambo models that this board will fit, so please ask if you are uncertain.  

This lens board is in excellent condition, awaiting your #3 shutter and lens.

Lens Board Width: 163 mm
Lens Board Height:  163 mm
Hole Diameter: 65 mm
Weight: 167 g (5.9 oz)


Your Cambo Lens Board will ship worldwide by way of USPS First Class Mail within 1 business day after your PayPal payment is received.  Payment is expected within 12 hours of the auction's end.  If you can't make the payment within this time frame, then send me a message.

Thank you for looking!

more photo gear, here!


Cambo 4x5 Lens Board Copal #3


Click here for availability

Tuesday, March 8, 2016

Cambo Copal #1 4x5 View Camera Flat Lens Board

For your Cambo SC II, SC III, SC IV, 4x5 to 8x10 View Camera or the Calumet 45N, is a flat lens board in excellent condition.  There are many more Cambo models that this board will also fit, so please ask if you are uncertain.  

Cambo Copal #1 Flat Lens Board C7


Lens Board Width: 163 mm
Lens Board Height:  163 mm
Hole Diameter: 41.6 mm
Weight: 179 g (6.3 oz)





Your Cambo Lens Board will ship worldwide by way of USPS First Class Mail within 1 business day after your PayPal payment is received.  Payment is expected within 12 hours of the auction's end.  If you can't make the payment within this time frame, then send me a message.

Thank you for looking!

more photo gear, here!


Cambo Copal #1 Flat Lens Board C7
Cambo Copal #1 Flat Lens Board C7



Friday, March 4, 2016

Please Help Save The Production of Polaroid Type 100 Peel Apart Pack Film Manufactured by Fuji


Not only is this film used in Polaroid pack cameras, but this is the only instant film that is readily used with Medium and Large Format Cameras.


http://savepackfilm.net

Change.Org Petition

https://www.change.org/p/save-instant-film


Holga 120GN Polaroid 665
Holga 120GN ~Polaroid 665

Shen-Hao HZX57-IIAT Fuji FP-100C expired 10/07
Shen-Hao HZX57-IIAT ~ Fuji FP-100C45


Wednesday, March 2, 2016

SINAR Binocular Magnifier 471.21 - 2X magnification of your 4x5 Ground Glass

The SINAR Binocular Magnifier allows 2x magnification when viewing the ground glass.

You may insert the magnifier on one side of your Standard or Wide Angle Bellows or you can attach it to a 4x5 carrier frame, just as you attach a lens board or a film back.
SINAR Binocular Magnifier 471.21
Also, you may attach the Binocular Hood 531.51 to the two studs that appear on the front, so that stray light does not enter from the sides.  When using the Binocular Hood that already has a diopter lens, you use the lever on the left side to flip the Binocular Magnifier lens out of the way.

This is one of the must have accessories for the SINAR system.

Though there is a scratch in one of the lenses, while testing on a SINAR Handy contraption, I did not notice the scratch, as your eye focuses far beyond the scratch, on the ground glass.

Your SINAR Binocular Magnifier will ship worldwide, by way of USPS First Class Mail.  Payment is expected to be rendered within 12 hours of the listings end.

Thanks for looking!

Please see my other Photographic Listings