Calumet Cambo 4x5 Lens Board Adapter for Calumet 4x4 Lens Boards

Calumet 4x5 Lens Board Adapter for Calumet 4x4 Lens Boards

Excellent board cosmetically and functionally.

This board is for all Cambo View cameras that use a 4x5 Front Standard (163mm Lens Board) as well as  select models of Calumet View Cameras .  This lens board adapter allows you to  mount the smaller, more econimical Calumet 4x4 lens boards on the view cameras, as previously mentioned.

Dimensions: 163mm square Plate with 74mm Hole

This adapter is  a "must have" for your Super Cambo 4x5, 5x7 or 8x10 kit.

Shipping Worldwide via USPS First Class Mail or Priority Mail if desired.
Payment must be rendered within 12 hours of auction end.
Good luck and thank you for looking!

After considering this lens board adapter, please have a look at my other Photographic Gear!

Graflex Graphic View II 4x5 Monorail Large Format Camera Conical Bellows Tapered

Graflex Graphic II View Camera Bellows

The bellows appears to be light tight and awaits your next Graphic II repair or even a custom camera project.

I recently purchased this bellows for a custom project, but I would need to remove the frames, which would deplete the value of the bellows.

I would call the condition perfect, considering an item like this is obviously no longer produced.

Here are the approximate dimensions:
Maximum Extension: 15 in or 380mm
Minimum Extension: 2.75 in or 63mm
Large Frame Outer: 6 in or 150mm
Large Frame Inner: 5.25 in or 133mm
Small Frame Outer: 4.5 in or 115mm
Small Frame Inner: 3.25in or 83mm

Shipping will be provided by USPS Priority Mail for domestic shipping and First Class for International
Payment must be rendered within 12 hours of auction end.

Thank you for looking and good luck.

Please have a peek at my other photographic gear!

Polaroid 405 Instant Film Holder
For using Type 100 Instant Film on a 4x5 Large Format Graflok back

This is a genuine Polaroid 405 Instant Film Holder and is the only way to shoot instant film on a large format camera.

With it, you may use Fuji FP-100B, FP-3000B and FP-100C. Of course, your Polaroid pack films like 665, 664, 667, 669 or ID-UV will work with this film holder as well.

This holder is mandatory for all Large Format kits, that is, if you want to use instant film that is still being manufactured.
If you already have one, buy another for a spare or so you can shoot with two different types of film.

This back has been tested and is perfect working condition.  There are a few very minor marks from light usage.  There was tape residue on the leatherette, but I have done my best to remove all traces.

Shipping will be provided by USPS Priority, worldwide.  First Class is not available as the film holder will be shipped with Tracking and Insurance.

Payment shall be rendered via PayPal within 12 hours of the auction's end.

Please don't hesitate to message me should you have any questions or there is has been an error or omission on my part.

Thank you for looking and good luck.

Please check out my other stuff!

Konica Infrared 750mm Black and White 120 Print Negative Film

Konica Infrared 750mm
Black and White Print/Negative Film, Type 120

I have not had the opportunity to load any of this up as of yet, but I am willing to share a few.

Be sure to check out the specification, and also make sure you have a Wratten #25 red filter. Though a filter isn't required, it will help you achieve the desired infrared effect.

Shipping Worldwide via USPS First Class Mail. Payment is due within 12 hours of the auction's end.

Thank you for looking and good luck.

I have more photographic film and gear listed here.

Photo of actual items in which you will receive.