Doing It Again - ONE INSTANT for Classic Packfilm Cameras

Florian "Doc" Kaps is Doig It Again!

Holga 120GN ~Polaroid 665

Type 100
ONE INSTANT
Analog Packfilm Kickstarter

Jon's Polaroids on Flickr 

Fuji Lens Hood GX80mm

This lens hood was designed for the Fuji GX680 Medium Format Camera's 65mm and 80mm lenses.

The lens hood is metal, of the slip-on design, allowing it to fit over lenses having an outside diameter of 100mm, and typically having internal threads of 95mm.

Included is the hood extension ring, which has 110mm x 1, male and female threads and an extension of 20mm.

The hood works great as I tested it by mounting on my Schneider SAXL 72mm Lens.  The set screw is slightly bent, however it worked fine, with no binding.

I also checked the extension threads, of course by attaching and detaching from the primary hood section, but also by checking the female threads of the extension by mounting to my APO-NIKKOR 610mm Lens.  Perhaps this is too much info for this listing, but this hood makes a great accessory for the Large Format lenses mentioned.

Please feel free to message, should you have any questions in regards to the mounting and compatibility, though I am not a Fuji 680 user or owner.

Your Fuji Lens Hood GX80 will ship within one business day of the receipt of your PayPal payment, which is due within 12 hours of the listing's end.

Please see my other Photographic Listings

Bid or Buy

Horseman SW617 Professional, almost

If I only had a Shneider Super Angulon XL 90mm... or the cone for a SSAXL72.  Donations welcome!

Until I can source the correct lens or cone, it could make a fun Pano-pinhole.

SINAR 473.31 Bellows Holder Clip

Bid or Buy

The SINAR Large Format Camera System utilizes these clips, in conjunction with the Accessory Rods, to hold a standard bellows.  This configuration may then be used on the front of the camera as a lens hood or on the rear as a focus hood.

Here is an example where two of the holders are being employed.

This auction is for ONE SINAR Bellows Holder, only.  Please message me if you are interested in an accessory rod, bellows or additional holder.  This bellows holder has been tested and works perfectly.

Your Bellows Holder will be shipped by way of USPS First Class mail, worldwide, upon receiving your PayPal payment within 12 hours of the listings end.  Should you not be able to render payment within this time frame then please, send me a message.


Please see more photo gear, here!

SINAR Aperture Control Lens Board for Compur #1 Shutter

Aperture control lens boards allow for the conversion of various lens board to manual SINAR aperture control.  This means that from behind the camera, you can adjust the aperture of your lens by adjusting the cord.  The cord has markings for the primary aperture f-stops.

Please understand that a both Copal and Prontor #1 shutters will also fit, however the f-stop scale on the cord is for Compur shutters, as upon pulling the control cord, the lever moves clockwise and the f-stop indicator labels progresses from small to large aperture, as do Compur shutters.

This lens board is in perfect, working condition and mounts as it should to all of my SINAR gear.  There are velcro tabs on the rear of the board

Per the SINAR Code documentation, I believe that one ore more of the following lenses, when mounted in a Compur Shutter would use this particular board.

• Rodenstock Grandagon N 90mm, 115mm, and 155mm Note: The 155mm can't be used the the SINAR Auto Aperture Shutter
• Rodenstock Sironar-N 180mm and 210mm
• Rodenstock APO Ronar 240mm and 300mm
• Schneider Symmar-S MC 180mm and 210mm

Aperture Range: f/5.6 to f/45
Lens Board Width: 139 mm
Lens Board Height:  139 mm
Hole Diameter:  ~41.6 mm
Weight: 207 g (7.3 oz)

Please see the images.

Your lens board will ship worldwide by way of USPS First Class Mail within 1 business day after your PayPal payment is received.  Payment is expected within 12 hours of the auction's end.

Thank you for looking!

more photo gear, here!

Click Here for Availability

Toyo 45A, 45AII Field Camera Lens Board Copal #3

MPN# 180-618

Opening Bid
Price: $24.42

Buy It Now
Price: $31.75

Click here for availability

SINAR 18 in Extension Rail

Price: $54.00

Click Here to Buy It Now!

Nice Horseman SINAR Copal #0 Lens Board for View Cameras

Horseman #0 View Lensboard 
MPN # 23513

Bid or Buy

SINAR Joint Rod 472.51.000

The SINAR Joint Rod, like the Accessory Rods and Bellows Clip Holders are essential items in both your compendium lens hood and focusing hood methodologies.
This item was purchased as New in the Box and I am unable to detect any wear. Please see the images.
Your SINAR Joint Rod will ship worldwide by USPS First Class Mail. PayPal payment should be rendered within 12 hours of the listings end.
Thank you for looking.
More gear can be found HERE!

Buy It Now

SINAR Auto Aperture Shutter f/5.6

Click here for availability

SINAR Auto Aperture 5.6 Shutter
Ships, worldwide!

Cambo Flat Lens Board with 62mm Hole - Schneider Helicoid Fits

 Click Here for availability

General Election November 8, 2016

Voting is cool!

October's Organization: Project Pegboard

The Shop: Drill Press Station

This Weekend, I feel as though I made some progress in the Shop.  I tell you, it's really the little things.  There are several pieces of stuff, not to mention drill bits, that I frequently need for the drill press, which end up sitting on the table, just out of view, to the right in the image.

Being that I have not completed the walls, I have been unable to install any organizational goods, like my cabinets and wall to wall shelving.  By the way, the shadow in the image marks the height of where the wall to wall shelving will be.  Coincidence, destiny or fate...it is what it is!

Anyway, I am completely thrilled and looking forward to printing out a gift certificate to the local Big Box store, so that I can shop for some of those cool Pegboard Accessories.

What's funny... I don't even recall where the pegboards (I have 3) came from. Probably a curb find.

Is not this the carpenter, the son of Mary...

Mark 6:3

Nikon Camera Adapter SINAR 556.93

94227 Nikon Camera Adapter (f/Nikon F, F2 & Nikkormat) #556.93

Polaroid 73B Instant Film Holder for Polaroid 600SE Professional Rangefinder and Polaroid Miniportrait Cameras

This Instant #film holder takes #Polaroid Type 100 peel-apart, pack film.  Film examples would be Polaroid 665, 669 or Fuji flavors FP-100B, FP-100C, or Fuji's high speed black and white film FP-3000B.  Though production has ended on all of these films, there is still, very good Fuji film available.

This back attaches to the Polaroid 600SE Professional Rangefinder Camera as well as the Polaroid Miniportrait Passport Camera.  This model is the special one, as compared to the typical Model 73A Film Holder, in that it allows the attachment of a special "validation plate" on the inside.  Personally, I always thought that this would be a great place to install a neutral density filter when using FP-3000B.

This film holder is listed as used, however, I couldn't detect any signs of typical usage, though there are scratches on the dark slide.  Please see the images.  This holder may be one of the best that you will ever find, next to a new one.

I am shipping this one via USPS Priority Mail, worldwide.  Payment is expected to made within 12 hours of the listings end.

Thank you for viewing and please take a look at my other Photographic Listings.

Cheers,

Jon

Click Here for Availability

Mamiya Sekor 75mm f/5.6 Lens For Polaroid 600SE Professional Rangefinder

The Mamiya Sekor 75mm lens is known for being the Wide Angle Lens capable of covering film up to the 4x5 format.  So if you don't have a Polaroid 600SE Professional Rangefinder Camera, you can remount the elements in a Copal #0 Shutter and add this lens to you Large Format Kit.


Very Clean...
Strong Shutter
No Caps....
No viewfinder.....

Click here for availability

Cambo Flat Lens Board with ~61 mm Hole

For your Cambo SC II, SC III, SC IV, 4x5 to 8x10 View Camera or the Calumet 45N, is a flat lens board in good condition.  There are many other Cambo models that this board will also fit, so please ask if you are uncertain.

Having a custom hole size of almost 61 mm, I found this board especially useful in mounting the 210mm Industar-51 lens without permanently attaching the flange to the lens board.
This lens board does show use, including minor paint loss and/or scratches.  Please see the pictures.

Lens Board Width: 163 mm
Lens Board Height: 163 mm
Hole Diameter: 60.9 mm
Weight: 167 g (5.9 oz)

Your Cambo Lens Board will ship worldwide by way of USPS First Class Mail within 1 business day after your PayPal payment is received.  Payment is expected within 12 hours of the auction's end.  If you can't make the payment within this time frame, then send me a message.

Thank you for looking!

more photo gear, here!

Click Here for Availability

Great news! Fuji Instax Film in Monochrome - Coming Soon!

I admit, I don't have a camera to shoot Mini Instax, only Instax-Wide, but this is where it starts.
We must all support Fuji in their humble compromise.

Fuji Instax Mini Film Monochrome

https://www.fujifilm.eu/eu/news/article/instax-mini-film-monochrome-a-new-film-that-expands-the-possibilities-of-photographic-expression-using-instax-film-1

Build out a Toyo Omega 45D 4x5 View Camera - Just add bellows

For those of you that may not know, the Omega-View Line of Large Format cameras were made by Toyo for Omega.  This particular model does not use interchangeable bellows, but has the bellows glued to the standards.  Also the 4x5 Graflok/Ground Glass holder is fixed with screws, however the ground glass assembly can be removed and can revolves 360°.  The lens boards used are Toyo standard 158 mm x 158 mm.

I don't currently have a replacement bellows on hand, so I am selling this as is with the old bellows included.

Both of the bellows metal frames are included as well as all of the screws.

Being that my intentions were to replace the bellows, the seating surface of the standards were cleaned of the former adhesive.

Overall, this camera is in great shape shape.  All movements and knobs function as they should. In my opinion the rear focus lever is not as tight as the front, however it locks down tight enough.

The focusing mechanisms ways were tightened via the set screws.

There is some slight paint loss on the ground glass frame.

Please see the pictures and feel free to message with any questions.  Everything shown in the images is included, except for the Tripod.

Your Omega 45D will ship upon your payment which is expected within 12 hours of the listings end.  Shipping will be provided by USPS Priority Mail or UPS Ground, worldwide.

Thanks for looking.

Please see my other Photographic Listings

Click Here For Availability

Cambo 4x5 Normal Bellows

This bellows is the Normal Bellows that should have come with your Cambo 4x5 SC, Legend, Ultima, or Calumet 45N Large Format View Camera.

If you need a bellows then this is typically the bellows one would start with, allowing about 300mm to 400mm of extension.  When collapsed, or closed the extension is minimally 50mm.

My light test is to go outdoors and view the bellows in the bright sunlight.  Upon testing this bellows, I did see a few minimal pinholes, but not enough to render this bellows useless.  I have produced many images with bellows having pinholes and have not had a problem yet.

On one of my 8x10 systems the bellows are completely torn open, however I merely cover the bellows with a small darkcloth.

One last testimony on pinholes: I shoot my eBay images with an EOS Digital Camera mounted on a view camera.  On one particular day I changed from a standard bellows to a wide angle bellows.  Maybe 5 days later I noticed that I had completely forgotten to attach the bellows to the rear standard.  This is a true story.

I say all of this not to convince you to purchase a defective product, but considering the availability of Large Format Gear, something is better than nothing.  Also the classic metal frames are becoming rather hard to come by.

Your CAMBO 4x5 Normal Bellows will ship same day or within one business day of receiving your PayPal payment, via USPS First Class Mail for buyers abroad or USPS Priority Mail for domestic buyers.  Your payment shall be made within 12 hours of the listing's end.  Please feel free to send a message if this time frame can not be met or should you have any questions.

Thank you for looking!

Please see my other Photographic Listings

Click Here For Availability

Kodak Ektar 100, 8x10 Large Format Color Print / Negative Film

Kodak Professional
Ektar 100 Color Print 8x10 Film

Kodak Ektar 100 8x10, ISO 100, Development C-41, Expiration 11/2012

This auction is for a TEN (10) Sheet/Exposure Box of 8x10 inch, large format, negative film as described above.

The film is from my personal collection and has not been frozen since shipped from the distributor.  The Gallery Pic is an image of the product in which you will receive.

See the spec from Kodak.

Shipping Worldwide via USPS Priority Mail.
Payment is due within 12 hours of listing's end.
Good luck and thanks for looking!

Please, check out my other items!

CLICK Here For Availability

SINAR Rail Extension 6"/15cm (Black)

This is the 6" extension rail for SINAR View and Field cameras, Models F, F1, F2, C, C2, P, P2, X and Norma.

Sometimes you need a shorter length of monorail extension, allowing you to get in closer to the subject being photographed.

This extension rail is in good condition.  The rail was tested and functions as it should.  There is minor paint loss at the bottom of the rail, as shown in the second Gallery Pic.

Your SINAR 6" Extension Rail will be shipped via USPS First Class Mail, worldwide within 1 business day of receiving your PayPal payment.  Payment is expected to be rendered within 12 hours of the listing's end, and should this not be possible, then simply send me a message.

Thanks for looking!

Please see my other Photographic Listings

Click Here For Availability

CAMBO 4x5 Wide Angle Bag Bellows

If you don't have this bellows for your CAMBO 4x5 View Camera, then just click the "Buy It Now" button, and your short focal length problems will be resolved in about 3 days.

Wide angle bellows allow you to move your standards closer together as well as allowing movements when the typical pleated bellows is too restrictive.  As shown in the first gallery image, and below, the maximum extension distance is nearly 300 mm or 12 inches.

This bellows is in excellent condition and shows almost no signs of usage.

Your CAMBO 4x5 Wide Angle Bag Bellows will ship same day or within one business day of receiving your PayPal payment, via USPS First Class Mail, worldwide.  Your payment shall be made within 12 hours of the listing's end.  Please feel free to send a message if this timeframe can not be met or should you have any questions.

Thank you for looking!

Please see my other Photographic Listings

Click Here to Buy It Now

Calumet Cambo Lens Board Adapter allows Graflex Crown Graphic Lens Boards

This is a useful lens board adapter which allows Graflex Graphic Crown  and Pacemaker type lens boards to be used on Cambo 4x5 View Cameras, as well as select Calumet cameras that were made by Cambo.  I am not certain if this board is custom made or OEM, however it works very well with my Cambo SC series of cameras.

This adapter shows minimal use and functions perfectly. The color appears more "tan-ish" than green in my opinion.

Your Cambo to Graphic Lens Board Adapter will ship worldwide, by way of USPS First Class Mail within one business day of your PayPal payment.  Payment is expected to rendered within 12 hours of the listing's end.

Thanks for looking.

more photo gear, here!

Click here to check availability

56 Frames of 16mm film

56 Frames of 16 mm Film scanned

He drifts!

SINAR System Wide Angle Bellows I

Lens Hood
Ground glass focusing hood
Wide Angle "Bag" or "Ballon" Bellows
Works with Horseman View Cameras, too!

Click here to buy it now!

Toyo Field to Toyo View Lens Board Adapter

This is a very important lens board adapter for the Toyo  View Camera series of large format view cameras.  It allows the use of the 110mm Toyo Field Camera (45A, 45AII, 45CF, 45CX) lens board on the 158mm Toyo-View Standard for cameras such as the 45G, 45GII, 810G and 810M.  By using this adapter, you may leave your lenses mounted on the 110mm lens board and then attach that lens board to this adapter, and then the adapter to the larger 158mm standard.

This adapter shows very little use and functions perfectly.  One benefit that this adapter has over the aftermarket adapters is that the plane of the 110mm lens board is not extended, so you save a few millimeters.

Note: The Toyo 45CX is a monorail View Camera however it uses the 110mm format on the front standard.

Your Toyo Field to Toyo View Lens Board Adapter will ship worldwide, by way of USPS First Class Mail within one business day of your PayPal payment.  Payment is expected to rendered within 12 hours of the listing's end.

Thanks for looking.

more photo gear, here!

Click Here To Buy It Now

K. B. Canham Lens Board #0

Click Here to Buy It Now

SINAR Blank Undrilled Lens Board

Blank or undrilled lens boards are quite useful for custom lens mounting or even as a cover or cap for your 

SINAR view camera. They also serve as great shooting platforms for up close macro photography. I also keep a couple of these around as a reference for dead center.  Another popular usage is for making lens board adapters.

This rare board weighs only 143 grams or 5.0 ounces.  Though this particular series of lens boards are not as light as the Norma Generation, they are lighter than the latest style lens boards that have the double ridge light trap. 

Lens Board Width: 140 mm
Lens Board Height:  140 mm
Hole Diameter: 0 mm (Undrilled)
Weight: 143 g (5.0 oz)

Your SINAR Lens Board will ship worldwide by way of USPS Priority Mail within 1 business day after your 
PayPal payment is received.  Payment is expected within 12 hours of the auction's end.  If you can't make the payment within this timeframe, then send me a message.

Thank you for looking!

more photo gear, here!

Click here to Buy It Now

Just Listed: Cambo #1 Flat Lens Board

Click here for availability

Cambo #1 Recessed Lens Board (Calumet Branded)

If you want to shoot with wide angle lenses or if you would just like to regain movements for your Cambo SC II, SC III, SC IV, 4x5 to 8x10 View Camera, then this is the lens board that you need. This #1 lens board has a 30mm recess so that your lens and shutter assembly will be closer to the plane of focus by 30mm.

Though the lens board is branded Calumet, it is manufactured by Cambo and can be used with most Cambo View Cameras, as well as the Calumet Legend 4x5 View Camera.  Please message if you have any questions regarding compatibility. 

This lens board is in perfect working condition.

Lens Board Width: 163 mm
Lens Board Height:  163 mm
Hole Diameter: 41.7 mm
Recess: 30mm
Weight: 336 g (11.9 oz)

Your Cambo Lens Board will ship worldwide by way of USPS First Class Mail within 1 business day after your PayPal payment is received.  Payment is expected within 12 hours of the auction's end.  If you can't make the payment within this time frame, then send me a message.

Thank you for looking!

more photo gear, here!

Click here for availability

Wisner 4x4 Copal #0 Lens Board for 4x5 Field Camera

This lens board is in good condition and suitable for your Wisner, and perhaps Zone VI 4x5 Field Camera.

Two of the edges are tapered and there is a slight indentation in the opening to accommodate shutters with a locating pin.

Board Specifications:

• Nominal width x height: 4 x 4 inches
• Actual width x height: ~ 3-31/32 x ~ 3-31/32 inches
• Hole Diameter: 1-3/8" or 35.6mm
• Rear Plateau width x height: 3-7/16 x 3-7/16 inches
• Rear Plateau extension: 1/8 inches
• Rear recess Diameter: ~ 2-1/8 inches
• Rear recess Depth: 1/8 inches
• Overall Board thickness: ~ 1/4 inches (slightly under)
• Weight: 1.0 ounces

Your lens board will ship via USPS First Class Mail for both domestic and international buyers after your PayPal payment has been received.  Your PayPal payment must be rendered within 12 hours of the listings end.  Please message me, should you have any questions, at all.
Thanks for looking.  Feel free to take a look at my other offerings.

Click here for availability